Non-contact And Non-sensing Temp-measuring System Smart AI Infrared Thermal Imaging Camera System

Non-contact And Non-sensing Temp-measuring System Smart AI Infrared Thermal Imaging Camera System

Introduction:

This screening model is composed of smart AI visible light camera and thermal camera. With thermal sensor and face capture algorithm, ISP photo technology, it can capture the human face and measure the temperature at the same time. Thus it can be used in measuring the human temperature at the entrance of school, building, railway station, etc for stopping the spread of the virus.

Interface:

1,Power: 12VDC

2,Internet: RJ45

3,Relay: +：NO  -：COM

4,Audio: 1：input 2：ground 3：output 4：empty

Installation:

Location selection:

A. Camera should be put at the front to capture the face.

B. The height should be around 2 meters with an camera angle 0-5 degree.

C. People should be stand at the distance of 1 meter for perfect temp measuring.

Environment Selection:

A. Illumination Illumination: no backlight, no relected light on the face, light should be even and no shadow. In order to capture the face of human, the illuminating light is necessary for illumination on the face ( 250~800Lux).

B. Light and wind: it should be installed indoor, no wind between the people and camera; no sunshine around.

Packing List:

1*Main Unit

1*Adaptor